YFFY Lights Logo

Chimney Obstruction Lights Solution

ICAO & FAA-compliant LED aviation obstruction lights engineered for industrial chimneys and stacks — built to withstand extreme flue-gas heat, corrosive emissions, and constant vibration at power plants, cement plants, chemical plants, and metallurgical facilities.

ICAO Annex 14 Certified · FAA AC 70/7460-1L Compliant · Heat-Resistant to 80°C+ · Corrosion-Resistant Housing · Solar & AC Powered Options · 2-Year Warranty
Get a Free Chimney Lighting Compliance Quote →

Chimney Obstruction Lights Solution

Industrial Chimney Obstruction Lights are a mandatory safety requirement for industrial chimneys and smokestacks — among the tallest and most hazardous structures for low-flying aircraft. Found at power plants, cement plants, chemical plants, metallurgical facilities, and paper mills, industrial chimneys commonly range from 45 meters to over 200–300 meters, and their slender profile, remote industrial-zone placement, and continuous emissions make them a distinct aviation hazard requiring specialized marking.

Chimney lighting presents challenges that most other structure types simply don’t face: obstruction lights must survive sustained flue-gas heat exceeding 80°C, resist corrosive exhaust compounds and constant vibration, and be positioned carefully to avoid direct exposure to the exhaust outlet itself — all while maintaining full ICAO/FAA compliance across multiple tiers on very tall stacks. For plant operators, the wrong lighting choice doesn’t just mean a compliance failure; it means premature equipment failure in one of the most difficult places on the entire facility to access for repair.

YFFY Lights supplies complete inductrial chimney obstruction lighting systems — engineered specifically for high-temperature, corrosive industrial environments — helping power plant, cement, chemical, and manufacturing facility operators achieve full aviation compliance without recurring heat- or corrosion-related failures.

Which Chimney Obstruction Light Do You Need? (By Height)

Chimney Height

Required Light Type (ICAO/FAA)

Configuration

Notes

Below 45m

Often exempt, or Low Intensity

Single beacon at top (if required)

Confirm local threshold with civil aviation authority

45m – 105m

Low Intensity Type A/B

Red flashing or steady, top-mounted

Simple, low-cost configuration for shorter industrial stacks

105m – 150m

Medium Intensity Type B

White (day) / Red (night), top + mid-level

Auto-switching based on ambient light

Above 150m

High Intensity Type A + Medium Intensity

High-intensity at top and at 75–105m intervals down the stack; medium-intensity added between high-intensity tiers

White flashing high-intensity units can often eliminate the need for red/white paint markings, reducing repainting maintenance costs

Note: Industrial chimney aviation light are positioned away from the exhaust outlet to avoid direct heat and corrosive gas exposure, and the number of lights per tier depends on the chimney’s external diameter to ensure full-circumference visibility. Exact spacing and quantity requirements vary by jurisdiction — YFFY Lights’ engineering team provides a free pre-project compliance review based on your chimney’s exact dimensions.

 

Not Sure Which Configuration Your Chimney Needs? Talk to a Compliance Engineer →

Chimney Obstruction Lights System Solution

Low Intensity Telecom Tower Lights

Low & Medium Intensity Chimney Lights

Low and Medium Intensity Obstruction Lights (Type A/B) cover chimneys up to 150 meters, with automatic red/white switching based on ambient light. Built with corrosion-resistant PC lampshades and sealed circuitry, these lights are designed to operate reliably despite the sulfur compounds, particulates, and moisture commonly present in industrial flue-gas environments.
View Medium Intensity Lights →
Yellow industrial storage cabinet with a clear front and two shelves on legs angled slightly for viewing

High Intensity Multi-Tier Chimney Lights

For chimneys exceeding 150 meters, High Intensity Obstruction Lights (Type A) are installed at the top and at regular intervals (typically 75–105 meters) down the stack, with medium-intensity units layered between tiers. White flashing high-intensity lights meet ICAO requirements without red/white paint markings on the stack itself — a meaningful maintenance cost saving for plant operators who would otherwise need periodic stack repainting.
View High Intensity Lights →
155 LED Aviation chimney obstruction lights

Heat & Corrosion-Resistant Housing Series

Standard obstruction lights are not designed for sustained exposure to 80°C+ flue-gas heat and corrosive exhaust compounds. YFFY’s chimney-rated fixtures use heat-stabilized housing materials and sealed, corrosion-resistant components engineered specifically for the thermal and chemical stress unique to industrial stack environments — positioned per engineering guidance away from direct exhaust exposure.
View Chimney Lights →
Solar Powered Tower Warning Lights​

Solar-Powered Chimney Warning Lights

Many industrial chimneys are located in active plant zones where running new electrical conduit is disruptive, costly, or restricted for safety reasons. Solar-powered obstruction lights install in minutes without wiring runs or waterproof-layer penetration, using high-efficiency monocrystalline panels (up to 22% conversion efficiency) and battery backup rated for 15–20 days of autonomous operation.
View Solar Warning Lights →
Dual Head Double Aviation Obstruction Lights​

Dual-Circuit Redundancy & Fault Alarm Systems

Chimney tops are among the most difficult and hazardous points on any industrial facility to access for maintenance. YFFY’s dual-circuit redundant lighting with fault alarm functions provides early warning of lamp failure before a “dark stack” compliance risk develops — critical for facilities where scheduling emergency high-altitude access can take days.
View Dual-Head Lights →
Stainless steel enclosure with six circular RFcoaxial connectors on the front panel

GPS-Synchronized Multi-Tier Controllers

For telecom tower clusters, co-located multi-tenant towers, or tower farms, synchronized flashing controllers ensure every obstruction light flashes in unison as required by aviation authorities. YFFY’s controllers support GPS, BeiDou, and LoRa wireless synchronization (up to 10km), remote control, and telemetry monitoring for centralized fault alerts.

View Synchronization Systems →

Why Plant Operators & EPC Contractors Choose YFFY Lights

  • Factory-Direct Manufacturing — Own R&D and production facility, eliminating trading-company markups on large industrial lighting orders.
  • Engineered for Industrial Extremes — Heat-resistant housings rated for sustained flue-gas exposure, corrosion-resistant materials for sulfur and particulate-heavy environments, and vibration-tolerant mounting.
  • Full Compliance Documentation — ICAO Annex 14 and FAA AC 70/7460-1L compliant products, with photometric test reports and ISO 9001 certification for EPC tender and permitting submittals.
  • Reduces Total Maintenance Cost — White high-intensity lighting can eliminate recurring stack repainting requirements; dual-circuit redundancy and fault alarms reduce emergency high-altitude access.
  • No-Wiring Solar Options — Installation in minutes without conduit runs or waterproof-layer penetration, ideal for active industrial plant zones.
  • 50,000+ Hour LED Lifespan — Minimizes replacement frequency in one of the hardest-to-access locations on any industrial facility.
  • Global Project Experience — Supplied chimney and industrial stack obstruction lighting for power, cement, chemical, and manufacturing facilities across 80+ countries.
  • 12-Hour Response, 1–3 Year Warranty — Dedicated project engineers, free replacement for non-human damage during warranty, 24-hour after-sales support.

How We Deliver Your Chimney Lighting Project

  1. Free Compliance Consultation — Share your chimney height, diameter, and location; our engineers confirm the required light type, tier spacing, and quantity within 12 hours.
  2. Custom Quotation & Datasheets — Receive factory pricing, technical drawings, and compliance certificates for EPC tender or plant safety submittals.
  3. Production & Quality Inspection — Pre-production parts inspection, appearance/function testing before shipment, instant tracking updates.
  4. Global Shipping & Installation Support — Products shipped worldwide with installation guides addressing safe positioning relative to exhaust outlets and hot-work coordination.
  5. After-Sales & Maintenance — 24-hour support, warranty coverage, and maintenance manuals designed to minimize high-altitude access on operating industrial stacks.

Chimney Lighting Compliance Standards

ICAO Annex 14

ICAO Annex 14 — Aerodromes provides the global baseline for obstacle marking and lighting classification — low, medium, and high intensity — referenced by most national aviation authorities when regulating industrial chimney lighting requirements.
obstacle marking and lighting

FAA AC 70/7460-1L

In the United States, the FAA Advisory Circular 70/7460-1L governs obstruction lighting for chimneys and stacks subject to FAA determination, specifying light type (L-810/L-864/L-865), tier spacing, and synchronization requirements based on structure height.
obstruction lighting for chimneys

Regional & National CAA Requirements

Chimney lighting projects typically require coordination between aviation compliance requirements and plant safety/environmental regulations — including hot-work permits for installation, compatibility with emissions monitoring equipment, and positioning that avoids interference with exhaust flow. YFFY Lights supports project engineering teams with technical guidance across both dimensions.
Type A Medium Intensity Obstruction Light, Medium Intensity Obstruction Light, Type A Obstruction Light, Solar Aviation Obstruction Light, Solar Obstruction Light, Solar Warning Lights
Request ICAO/FAA Compliance Certificates →

Engineering Resources

Industrial worker in a red hard hat and safety harness adjusts a red beacon on a railing with large storage tanks in the background

obstruction lighting for chimneys Installation Guides

The Aviation Obstruction Lights Installation Guides provide comprehensive step-by-step instructions for correctly positioning, wiring, and mounting obstruction lights on chimneys in compliance with international aviation regulations. Guides cover optimal mounting height intervals, waterproofing techniques, and integration with structural lightning protection systems, supporting both EPC contractors and maintenance teams.

Know More
Two construction workers wearing hard hats stand on a suspended work platform above a city skyline, being lifted by a crane over a curved rooftop track.

Aviation Obstruction Lights Maintenance Manuals

The Aviation Obstruction Lights Maintenance Manuals provide detailed guidance for inspection intervals, LED module replacement, battery health checks, and troubleshooting of controller faults. Designed for facility managers and maintenance contractors, these manuals help extend equipment lifespan, prevent compliance lapses, and reduce total cost of ownership.

Know More

Applications

Night view of a power plant with two cooling towers emitting steam and red warning lights on the towers at night

Power Plant Chimneys (Coal, Gas, Biomass)

Night view of a power plant with tall red and white striped smokestacks glowing in the dark

Cement Plant Stacks

Night-time view of a large oil refinery with illuminated towers, pipelines, and machinery against a dark blue sky

Chemical & Petrochemical Plant Chimneys

Nighttime view of a large oil refinery with multiple lit smokestacks and visible vapor plumes on a dark sky

Metallurgical & Steel Mill Stacks

Industrial power plant with two tall red and white smokestacks emitting steam at dusk next to a metal framed facility

Paper Mill & Pulp Facility Chimneys

Night view of a lit industrial refinery with tall smokestacks and complex piping at night

Large Manufacturing Complex Exhaust Structures

Worker in a red hard hat and gloves installing a red warning beacon atop a rooftop tower, city skyline in background

Waste-to-Energy & Incineration Plant Stacks

Two red beacon lights atop a tall striped tower overlooking a city and river On the left a larger red light with a white base on the right a smaller red light amid hazy skyline

cement plant chimney obstruction lighting system

Industrial Plant chimney obstruction lighting

Industrial Plant chimney obstruction lighting

Frequently Asked Questions

Most jurisdictions require obstruction lighting for structures exceeding 45 meters, though thresholds vary by country and proximity to flight paths. Since industrial chimneys often reach 150–300 meters or more, multi-tier lighting configurations are common — confirm exact requirements with your local civil aviation authority during design.
Standard-grade obstruction lights are not designed for this environment. Chimney-rated fixtures need heat-resistant housings (typically rated for 80°C or higher) and corrosion-resistant sealed components, and should be positioned per engineering guidance away from direct exhaust outlet exposure to maximize service life.
In many jurisdictions, using ICAO-compliant white high-intensity flashing lights can eliminate the requirement for red/white paint markings on the stack — a meaningful maintenance saving, since repainting a tall industrial chimney is a significant recurring cost. Confirm with your local aviation authority, as requirements vary by country.
For chimneys above 150 meters, high-intensity lights are typically installed at the top and at intervals of roughly 75–105 meters down the stack, with medium-intensity lights added between tiers. The number of lights at each tier depends on the chimney’s external diameter, to ensure the structure remains visible from every direction.
Yes. Solar-powered obstruction lights are a popular choice for chimney projects specifically because they avoid new conduit runs or penetrations into existing waterproof layers — installation is typically a simple base-mount and angle adjustment, completed without disrupting plant operations.
Yes. YFFY Lights provides ICAO/FAA compliance documentation, photometric test reports, and ISO 9001 certification to support EPC contractor tenders, plant safety approvals, and environmental permitting requirements.
Scroll to Top