LED solar anti-collision obstruction light is a lighting device that uses solar energy as energy. Its usually used in places where warnings are required, such as high-voltage wires, ground wires, optical fibers, communication lines, airports, high-rise buildings, bridges, ports, etc.
Characteristics of Solar Anti-collision Obstruction Warning Light
- The shell of the solar light is made of marine-grade engineering materials, with an IP67 fully sealed structure, wear-resistant and corrosion-resistant;
- High-efficiency LED, Fresnel optical structure, with high brightness and long life.
- Independently developed advanced optical system, the luminous angle meets the requirements of CAAC and ICAO.
- With surge protection device, it can be used in harsh working environments.
- Adopting advanced high thermal conductivity paint technology, it has excellent heat dissipation performance and can effectively reduce the volume and weight of the lamp.
- It has the functions of impact resistance, lightning protection, sun protection, rain and snow protection, and can resist the invasion of severe weather such as typhoons and hail.
- Using 1.2W high-power solar panels, the photoelectric conversion efficiency can reach 23%
- Built-in high-end energy storage battery, it can work continuously for 15 rainy days.
- It has a 2.4G automatic synchronous flash function, which can achieve synchronous flashing and better prevent aircraft collisions.
- Solar obstacle warning lights have an automatic switch function, usually with a built-in light control system, which automatically lights up when the light is insufficient and automatically turns off when the light is sufficient.
Double-head Solar Anti-collision Obstruction Light
Parameters of YFFY-FZD-1 Solar Warning Light
| Light Source | LED | Vertical Divergence | ＞10° |
| Power Supply | Solar power supply | Horizontal Out-put | 360° |
| Power Frequency | DC | Overall Size | 295*118*238mm |
| Average Power | ≤0.5W | Installation Size | Universal clamp |
| Working Mode | Flash 30times/min | Ambient Temperature | -40℃～+55℃ |
| Altitude | ≥5500m | Effective Intensity | Night：＞15cd |
| Emitted Color | Red | Weight | 0.7kg(Installation clamp not included) |
| Photocell Ambient Brightness | 50/100Lux | Wind Load | 80km/h |
| Shell Material | ASA Marine grade engineering plastics | Luminous Mirror Material | Optical PC |
| Installing Structure | Rink rod installation | Energy Efficiency | ≥95% |
| Light Source Life | ≥200000h | Protection Grade | IP67 |
| Surge Protection Rating | 0.5KA | Relative Humidity | 0％～95％ |
| Get Wet In The Rain | Can be exposed to rain in any wind direction | Salt Spray | Can be exposed to salt spray |
| Radiation | Can be exposed to solar radiation | Insulation Characteristic | Between the shell and the ground: 1.414KVdc, 10S does not break down |
| Seismic Resistance | 10～500Hz,2G 10min/cycle,XYZ 60 minutes for each axis | EMC Standards | Emitted: EN55022(CISPR22) class A harmonic wave:EN61000-3-2,-3 |
| Mean Time Between Failure | ≥50000h,MIL-HDBK-217F(25℃) | Warranty | 2-3 Years |
This solar anti-collision obstruction light has the characteristics of high brightness, wear resistance, corrosion resistance, wide range of uses, durability, etc. It automatically charges during the day and works automatically at night. Its energy-saving, environmentally friendly, and saves manpower, material resources and costs.
Suitable for the following warning lighting places
- High-voltage wires
- Ground wires
- Optical fiber
- Communication lines
- Airports
- High-rise buildings
- Towers
- Bridges
- Ports
Installation & Maintenance
Installation:
Please install the LED solar obstacle warning light according to the instructions to ensure that the solar panel can receive sufficient sunlight. It usually needs to be fixed in a high or conspicuous position.
Maintenance:
Regularly check the working status of the solar LED warning light and the cleanliness of the solar panel to ensure the charging and lighting effect.
Reviews
There are no reviews yet.